120W Power Supply

Product Detail

Low price and high reliability105? output capacitorAC input power suitable for the worldHight efficiency and low operation temperatureSoft-start current can reduce the AC input impact effecticlyWith Short-circuit and owwerload protectionCompact size,light weight100% full-load burning testInstalled with EMI filter,minimum wave.

Product Description:

Model / Specification	S-120-12	S-120-15	S-120-24	S-120-48
DC output voltage	12V	15V	24V	48V
Output voltage error (Note2)	±1%	±1%	±1%	±1%
Rated output current	10A	8A	5A	2.5A
Output current rage	0-10A	0-8A	0-5A	0-2.5A
Wave and noise(Note3)	120mVp-p	125mVp-p	150mVp-p	150mVp-p
Inlet stability(Note4)	±0.5%	±0.5%	±0.5%	±0.5%
Load stability(Note5)	±0.5%	±0.5%	±0.5%	±0.5%
DC output power	120W	120W	120W	120W
Efficiency	80%	81%	83%	84%
Adjustable range for DC voltage	±10%	±10%	±10%	±10%
AC input voltage range	88~132VAC/ 176~264VACselected by switch 47~63Hz;255~370VDC
Input current	2.6A/115V 1.3A/230V
AC impulse current	Cold-start current 30A/115V 60A/230V
Leakage current	<1mA/240VAC
Overload protection	105%~150%Type:TOLDBACK Reset: auto recovery
Over-voltage protection	……
High-temperature protection	……
Temperature coefficient	±0.03%?(0~50?)
Setup rise hold up time	200ms,50ms,20ms
Vibration	10~500Hz,2G 10min./1cycle,Period for 60min,Each axes
Withstand voltage	Input and output interval:1.5KvAC Input and enclosure:1.5KvAC Output and enclosure:0.5KvAC
Isolation resistance	Input and output interval:Input and enclosure,Output and enclosure:500VDC/100MO
Working temperature and humidity	-10?~+60?,20%~90%RH
Store temperature and humidity	-20?~+85?,10%~95RH
Overall dimension	199*98*38mm
Weight	0.66Kgs
Safety standards	UL1012 TUV 60950(IEC950,UL1950)
EMC standards	CLSPR22(55022),IEC801-2?3?4,IEC555-2
Note:1.The testing condition for the parameter above is:230VAC input, rated load,25? 70%Rh,Humidity        2.Error,include the setting error, line stability and load stability.(Note:5)        3.Wave test:adopting&ldquo;A12&rdquo;double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting        4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage.        5.Load stability test: The load is from 0% to 100%,others 60%.        6.C2?3?11must be knocked down.